SRIF-20LD-AAB: Oilout-99 Oil Absorption Filter 20" for Large Diameter

Key Features

•  Immediately absorbs hydrocarbons retaining up to 3x its own weight

•  No release of hydrocarbons and extremely low-pressure drop when saturated

•  Cost-effective hydrocarbon removal at high flow rates*

•  25µm rating, used solely for oil reduction

• Specialised for Hydrocarbon Reduction  - Suitable for the polishing of trace hydrocarbons, the OilOut-99 is capable of absorbing up to three times its own weight before changeout is required. Designed to remove up to 99% of dispersed hydrocarbons, the SPECTRUM SRIF is suited to applications where the inlet contamination is below 500mg/l, such as surface run off water, CNC machine coolant and bilge separators. The OilOut-99 achieves best results as a polishing phase after primary oil removal technologies or in a double-pass system and is effective at removing a range of contaminants, including mineral oils and BTEX hydrocarbons

* With a complex range of oils and hydrocarbons, including emulsified and dissolved, it is always recommended that a small scale trial is conducted to validate cartridge performance.

Typical Applications

• Surface runoff water

• CNC coolant

• Bilge water treatment

• Engineering waste water

Specification

• Average Oil Removal (G) -

Standard Diameter - 375

Large Diameter - 1,500

• Carbon Type - Resin Impregnated Felt

• Netting - Polyethylene

• Core: Polypropylene

• Wrap: Polypropylene 

• End-Caps - Polypropylene  DOE (Double Open-Ended)

• Gasket:  Buna-N

• Max Operating Temperature - 70°C

• Max Operating Pressure Differential - 1.4 Bar 

• Material: Resin Impregnated Felt

• Performance: Excellent Hydrocarbon

• Micron: 25

• Length: 20"

• Diameter: Large (4.5")

• End-Cap - DOE (Double Open-Ended)

• Seal: Buna-N

• Flow Rate (lpm): 40

Oilout-99 Properties